Gigabyte has five P67 motherboards up for the US Sandy Bridge release – the P67A-UD3, the P67A-UD3P, the P67A-UD4, the P67A-UD5 and the P67A-UD7. At least the naming scheme is as easy to follow as previous generations – the higher the last number, the more expensive the board and the more features on offer:

P67A Series
P67A-UD3 P67A-UD3P P67A-UD4 P67A-UD5 P67A-UD7
Price $130 $160 $190 $260 $320
SATA 6 Gb/s
SATA 3 Gb/s
eSATA
2
4
0
2
4
0
2
4
2
2
4
2
4
4
2
CrossFireX
SLI
Yes
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
USB 3.0
USB 2.0
2
12
4
14
4
14
8
10
10
8
LAN 1 1 1 1 2
PCIe 2 x16
(1 x16, 1 x4)
2 x16
(1 x16, 1 x4)
2 x16
(2 x8)
3 x16
(2 x8, 1 x4)
4 x16
(2 x16 or 4 x8)

Visual Inspection

One of the first things I noticed about the P67A-UD4 was that it was not blue and white, like the majority of the Gigabyte motherboards have been recently that I have worked with. Predominantly featuring a black PCB, black PCIe connectors, black DIMM slots, black SATA 3Gb/s ports, a splash of white for SATA 6GB/s, silver chipset/FET coolers and a hint of old Gigabyte blue on those coolers is what we get this iteration. Not the whole range is like this – I have a H67 Gigabyte board on my desk here and that retains the blue and white credentials, as does the P67A-UD3.

The PCIe layout is slightly different to other P67 boards I have reviewed – with only two PCIe x16 slots (going to x8/x8 in dual GPU mode), there is an extra PCIe x1 slot on the board. In a dual GPU setup, this leaves two PCIe x1 and a PCI slot still free on the board, as well as a gap between dual slot GPUs to aid in cooling.

Fan headers on the board are located near the 8-pin power connector, one above the socket, one above the 24-pin power connector, and one below the PCIe slots, which would only be covered if you have a dual slot PCI card.

Gigabyte’s dual BIOS system is on this board. Yes, that is right – BIOS. No UEFI here. Well, that's not strictly true, as one of the latest BIOS updates at the time of writing (F6) implements an EFI into the BIOS, reportedly allowing bootable access to hard drives over 2.2TB. This is due to, as Gigabyte explained, that their board is actually UEFI, but without a proper GUI interface like other boards. They've used the old BIOS-style interface for now, as after years of plugging away they believe it's quick, stable and recognisable for consumers to understand. So underneath, it's truly 64-bit, meaning 2.2TB+ partition support is possible, and could also suggest that a new GUI is coming in the future. I asked about time-scale for this, but Gigabyte were undoubtedly tight-lipped about dates and implementations.

Visually, in terms of the board, there is not much else to say – the space between the socket and the PCI slots is virtually clear. There are no power, reset or clear CMOS buttons on board, neither is there a debug LED, and which is a real shame given that ASRock can do it on a $150 motherboard. Compared to the ASUS board, all the energy saving and turbo performance options are all software based – no easy flick of switches here.

Like the other P67 boards, the back panel is regular as well. Only a single PS/2 connector, 8 USB 2.0 ports, 2 USB 3.0 ports, 2 eSATA ports, S/PDIF Out connectors, a single gigabit Ethernet, and audio I/O.

ASUS P8P67 Pro: UEFI, Overclocking Gigabyte P67A-UD4: Board Features, In the Box, Software
Comments Locked

137 Comments

View All Comments

  • jigglywiggly - Thursday, January 20, 2011 - link

    gr8 article and I liked the ending comparison to the asrock board, I'ma get that. Just has so many features.
  • vol7ron - Thursday, January 20, 2011 - link

    Can't see getting P67. Waiting on Z67. Hopefully it will be all I ever dreamed of
  • Kaboose - Thursday, January 20, 2011 - link

    Z68 they didn't stay with 67 on the "Z" chipset apparently.
  • DanNeely - Friday, January 21, 2011 - link

    Possibly since LGA 2011 will also use DMI to connect to the chipset Z68 boards will be sold for both sockets; and presumably some of the more mundane chipsets would be used for server/workstation builds.
  • Etern205 - Friday, January 21, 2011 - link

    LGA 2011 will use the X68 which is different than Z68.
    SB chipsets
    Highend: LGA 2011/X68
    Mainstream LGA 1155/Z68<--Allows for OCing.
  • vol7ron - Saturday, January 22, 2011 - link

    Yep. It was either a typo or a finger fart :)

    Still, I'm hoping the processor batches will have improved by then. What I'm hoping for is the CPUs to mature a little bit, to possibly get a little higher BCLK overclock (not looking for much, just closer to the 5Mhz).
  • DanNeely - Sunday, January 23, 2011 - link

    Don't hold your breath. The BCLK limit is most likely due to something on your PCI/PCIEe buses (neither of which are designed for any overclock at all) bombing out; not your CPU.
  • medi01 - Friday, January 21, 2011 - link

    Suddenly, paying 150-200$ for a motherboard is OK.
    After all, it makes Intel CPUs "cheaper".
  • MrSpadge - Sunday, January 23, 2011 - link

    It's been like that for a long time. But personally I never saw the value in expensive motherboards.

    MrS
  • medi01 - Monday, January 24, 2011 - link

    I don't recall it "being like that" for AMD motherboards.

Log in

Don't have an account? Sign up now